Description
Conductive epoxies can be used to form an electrically conductive bond between dissimilar materials, eliminating any need for soldering. Traditional silver-based epoxy materials require up to 80% weight load of silver fillers and as a result tend to be costly, brittle and prone to mechanical failure.
Our Conductive Silver/Carbon Epoxy G6E-NS11 has been developed, based on advanced proprietary technology that requires 20% or less silver content to be at par with leading silver-based epoxies in terms of electrical properties. G6E-NS11 is intended to be cured at elevated temperatures. G6E-NS11 has a smooth, paste-like consistency after mixing and bonds well to a wide variety of substrates including metals, composites, ceramics, glass and plastics. However, it has limited adhesion to rubber and silicon-based materials. This product is recommended for electronic packaging applications such as die attachment and solderless interconnections, component repair, display interconnections. Recommended curing temperature is 150°C/302°F.
KEY FEATURES
- Advanced Silver/Nanocarbon filled epoxy
- Excellent electrical conductivity, volume resistivity ≤ 0.0008 Ω·cm
- Enhanced bonding to various substrates: glass, metals, plastics.
- Perfect for die attachment and solderless interconnections.
- Affordable alternative to pure silver epoxies
PRODUCT INFORMATION
TWO COMPONENT SYSTEM: Part A – smooth thixotropic dark gray paste, Part B – smooth thixotropic silver paste.
THE MIX RATIO: 100 (Part A) to 100 (Part B) by weight.
CURING INSTRUCTIONS: 45 min @ 150°C/302°F
COLOR: Silver gray
POT LIFE: 2-4 hours
GLASS TRANSITION TEMPERATURE: 65°C/149°F (cured at 150°C/302°F)
MIXED VISCOSITY: 55-75 Pa·s at 25°C/77°F
HARDNESS, SHORE: >65D
DENSITY: Part A 1.8 - 2.2 g/cm3
Part B 2.6 - 2.8 g/cm3
VOLUME RESISTIVITY: ≤ 0.0008 Ω·cm
STORAGE & SHELF LIFE: 12 months at 25°C/77°F in unopened, unmixed containers. Stores and ships at room temperature. No freezing or dry ice required.
MIXING INSTRUCTIONS: Stir both components before use. Add Part B to Part A in a separate container and mix slowly until uniform.
SAFETY & HANDLING: Always read the SDS for both Part A and Part B before use. Provide adequate ventilation and keep away from sparks and open flames. Avoid prolonged exposure to skin and breathing of vapors. Wash with plenty of soap and water to remove any residue from the skin.
PACKAGING: Part A and Part B (packaged in individual jars). This product can also be customized in any desired quantity based upon the customer's requirements.
Download
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.