FLEXIBLE CARBON FILLED CONDUCTIVE EPOXY G6E-FRP

Our Conductive Nanocarbon Filled G6E-FRP epoxy is a more-flexible, lower-stress version of G6E-P epoxy. It is a two-component, electrically-conductive adhesive formulated with a mixture of nanocarbon particles designed to combine high flexibility and good electrical/mechanical properties. G6E-FRP can be used for high performance bonding, sealing and coating. The conductivity of G6E-FRP is not sensitive to curing temperatures or ambient conditions. 

KEY FEATURES

• Carbon filled, low-cost silver alternative
• Flexible, low stress
• Electrical conductivity: <10 Ω·cm 
• Ultralight: Density is less than 1.1 g/cm³

PRODUCT INFORMATION

TWO COMPONENT SYSTEM: Part A – black paste, Part B – black paste.

THE MIX RATIO: 100 (Part A) to 100 (Part B) by weight.

CURING INSTRUCTIONS: Best results are obtained when the product is cured at one of the following schedules: 

• 24 hours @ 25°C/77°F
• 3 hours @ 80°C/176°F
• 45 minutes @ 150°C/302°F

Color: Black

Pot life: 1-2 hours

Glass Transition Temperature: 25°C/77°F

Mixed Viscosity: 450 – 550 Pa·s at 25°C/77°F

Hardness, Shore: >70A

Density: 1.0-1.1 g/cm³ 

Volume Resistivity: <10 Ω·cm 

Thermal Conductivity: 0.47 W/m•K at 25°C/77°F

Storage & Shelf Life: 12 months at 25°C/77°F in unopened, unmixed containers. Stores and ships at room temperature. No freezing or dry ice required.

Mixing Instructions: Stir both components before use.  Add Part B to Part A in a separate container and mix slowly until uniform.

Safety & Handling: Always read the SDS for both Part A and Part B before use.  Use products with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from the skin.

Packaging: Part A and Part B are packaged in individual jars.  Packaging, especially jar sizes and contained quantities, can be customized according to customer requirements.

 Download

Download Technical Data Sheet

Download Safety Data Sheet