ROOM TEMPERATURE CURABLE CARBON FILLED CONDUCTIVE EPOXY G6E-RTC

ROOM TEMPERATURE CURABLE CARBON FILLED CONDUCTIVE EPOXY G6E-RTC

ROOM TEMPERATURE CURABLE CARBON FILLED CONDUCTIVE EPOXY G6E-RTC

Our Room Temperature Curable Carbon Filled Electrically Conductive Epoxy G6E-RTC is developed and formulated primarily for applications requiring curing at ambient room temperature. G6E-RTC epoxy is formulated with proprietary nanomaterials and fillers to provide its performance characteristics. Room temperature curing eliminates the need for heating items to allow easier and safer connection of conductive components or materials. G6E-RTC epoxy is an ideal choice for applications involving heat sensitivity. G6E-RTC epoxy is low cost (compared to silver), non-metallic with good electrical conductivity characteristics.

G6E-RTC epoxy is ideal for applications involving manufacture or repair of conductive or temperature sensitive components. Ideal uses for G6E-RTC epoxy include printed circuit board and EMI/RFI shielding assembly and repair, and many other similar applications. 

KEY FEATURES

  • Room temperature curable

  • Carbon filled; low-cost silver alternative

  • Ultralight: Density is less than 1.1 g/cm3

  • Tack-free: 1 hour

  • Electrical conductivity: 15 Ω·cm 

 

PRODUCT INFORMATION

TWO COMPONENT SYSTEM: Part A – black paste, Part B – black paste

THE MIX RATIO: Mix 100 (Part A) to 20 (Part B) by weight.

CURING INSTRUCTIONS: Best results are obtained when the product is cured at one of the following schedules: 4 hours @ 22°C (72 F), 30 mins @ 60°C (140 F) or 10 mins @ 150 °C (302 F)

COLOR: Black

POT LIFE: 15 mins

GLASS TRANSITION TEMPERATURE: 74°C/165 F 

MIXED VISCOSITY: 500 Pa·sec at 25°C/77 F, 320 Pa·sec at 50°C/122 F

HARDNESS, SHORE: >65D

VOLUME RESISTIVITY: ~ 15 Ω·cm 

TACK FREE TIME: 1 hour

DENSITY1.0-1.1 g/cm3

STORAGE & SHELF LIFE 6 months at 25°C/77 F, in unopened, unmixed containers. Stores and ships at room temperature. No freezing or dry ice required

MIXING INSTRUCTIONS: Stir both components before use. Add Part B to Part A and mix slowly until uniform in a separate container.

SAFETY & HANDLING: Always read both SDS before use. Use the product with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.

PACKAGING: Part A and Part B (packaged in individual jars). This epoxy can also be supplied in bulk quantities based upon the customer’s requirements.

 

Data Sheet Graphene Silver Conductive Epoxy

 
SKU G6E-RTC
 
$45.00
 
Size (Part A+Part B)
Quantity

Detailed images

Customer feedback

Customer Reviews

There have been no reviews for this product.
nbsp;
Join Our Email List
Email:  
For Email Marketing you can trust
Official PayPal Seal