Conductive Graphene PLA Filament

Conductive Graphene PLA Filament

Conductive Graphene PLA Filament

Conductive Graphene PLA Filament, 100 grams

Availability: In Stock

Conductive Graphene PLA Filament, a material by Graphene 3D Lab, is specifically designed to allow you to 3D print electrically conductive components using almost any commercially available desktop 3D printer! By purchasing this filament, you agree that you have read and agree to the product description below, including the handling and disclaimer statements.


  • Volume Resistivity: 0.6 ohm-cm
  • Color: Black
  • Diameter : 1.75 mm
  • Size: 100 grams
  • Reel diameter: 20 cm (7.87 in)
  • Reel width: 5.5 cm (2.16 in)
  • Hub diameter: 5.2 cm (2.04 in)
  • Graphene-enhanced for superior conductivity and improved mechanical properties
  • PLA-based


EMI/RF Shielding

Manufacture of Conductive Traces

3D Printing

Capacitive sensing

High-Strength mechanical and functional parts

Printing Parameters:

Avoid leaving filament in a heated nozzle for an extended period of time.

Recommended extruder temperature: 220°C

Recommended platform temperature: 50°C

Recommended print speed: 1800 mm/min Nozzle size: > 0.5mm

Extrusion multiplier: 1.1

Conductive Graphene PLA Filament was tested using a direct drive 3D printing extruder. We do not guarantee that Conductive Graphene Filament will be compatible with non-direct drive 3D printers, such as delta models.


The filament is shipped in a vacuum-sealed package with a desiccant packet. Conductive Graphene PLA Filament should be stored in a dry environment away from dust and other particles. User should avoid extended exposure to moisture. We recommend storing in an enclosed container with a desiccant packet. 3D printers, especially their nozzles, should always be maintained and should be cleaned before and after use of Conductive Graphene PLA Filament to avoid complications during printing. Users are also instructed to wash their hands before and after use of Conductive Graphene PLA Filament.

Conductive Graphene PLA Filament softens at high-temperatures (~50°C) and is designed to be used with prints intended for room-temperature operation; it is intended for low-voltage and low-current projects only. Do not exceed 12 volts and avoid using the filament for power supply’s that exceed 100 mA. The resistivity of one meter of the filament is 4 kOhm’s. Keep in mind that a major factor influencing resistivity is contact resistivity, so shortening the length of the trace will not linearly correlate to a decrease in resistivity.

The intrinsic properties of our Conductive Graphene PLA Filament is such that it should not be left idle (as in not extruding or printing) in a heated printer nozzle. It may expand and cause blockage. After the printing is complete, remove filament from the nozzle promptly.

Also, please use the filament at regular intervals (if the entire spool is not used at once) in order to avoid degradation of the filament. Sitting in a place for a very long period of time (example: 1 year or more) (even in packaged conditions) can cause deterioration of the filament.


These materials and products may be used by skilled, experienced users, and at their own risk. To the fullest extent permissible by all applicable laws, we hereby disclaim any and all responsibility, risk, liability, and damages arising out of any death or personal injury resulting from the assembly or use of our products and materials. Specifications are subject to change without notice.

Weight 1.00 lbs
Diameter Size:
Quantity Out of stock

Customer feedback

Customer Reviews

There have been no reviews for this product.
Join Our Email List
For Email Marketing you can trust
Official PayPal Seal