CONDUCTIVE SILVER/CARBON EPOXY G6E-NS10

CONDUCTIVE SILVER/CARBON EPOXY G6E-NS10

CONDUCTIVE SILVER/CARBON EPOXY G6E-NS10

Conductive epoxies can be used to form an electrically conductive bond between dissimilar materials eliminating the need for soldering. Traditional silver-based epoxy materials require up to 80% weight load of silver fillers and as a result tend to be costly, brittle and prone to mechanical failure. 

Our Conductive Silver/Carbon Epoxy G6E-NS10 has been developed based on advanced proprietary technology that requires 25% or less silver content to be at par with leading silver based epoxies in terms of electrical properties. This improvement not only brings price of the material down but also makes G6E-NS10 less prone to fracture and allows for stronger adhesion to the target substrate.

Silver/Carbon Epoxy G6E-NS10  is a two component adhesive for high performance bonding, sealing and coating purposes. G6E-NS10 is intended to be cured at elevated temperatures. It can cure at room temperature in 60 hours or much more rapidly at elevated temperatures. Recommended curing temperature is 150°C. Volume resistivity of as low as 0.005 Ω·cm can be achieved under optimum curing conditions.

G6E-NS10 has smooth paste like consistency after mixing and bonds well to a wide variety of substrates including metals, composites, ceramics, glass and plastics. It,however, has limited adhesion to rubber and silicon-based materials.  This product is recommended for electronic packaging applications such as die attachment and solderless interconnections, component repair, display interconnections.

KEY FEATURES

  • Advanced Silver/Carbon filled epoxy

  • Excellent electrical conductivity, volume resistivity  ~0.005 Ω·cm 

  • Perfect for die attachment and solderless interconnections

  • Glass transition temperature 103 °C

NS11 Graphene Epoxy

PRODUCT INFORMATION

TWO COMPONENT SYSTEM: Part A – smooth thixotropic dark grey paste, Part B – smooth thixotropic silver paste.

THE MIX RATIO: 100 (Part A) to 100 (Part B) by weight.

CURING INSTRUCTIONS: Best results are obtained when product is cured at one of the following parameters: 60 hours @ 25°C, 3 hours @ 70°C or 1 hour @ 150°C

COLOR: Silver grey

POT LIFE: 4  hours

GLASS TRANSITION TEMPERATURE: 103°C (cured at 150°C)

MIXED VISCOSITY: 150 – 155 Pa·s at 25°C/77 F

HARDNESS, SHORE: >60D

VOLUME RESISTIVITY:  ≤ 0.005 Ω·cm 

STORAGE & SHELF LIFE: 6 months at 25°C in unopened, unmixed containers. Stores and ships at room temperature. No freezing or dry ice required.

MIXING INSTRUCTIONS: Stir both components before use. Add Part B to Part A and mix slowly until uniform in a separate container. 

SAFETY & HANDLING: Please read the SDS before use. Use it with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from the skin.

PACKAGING: Part A and Part B (packaged in individual jars). This epoxy can be customized to any quantity as per the customer's requirements.

APPLICATION NOTES

  • Solder replacement

  • Attachment of electro optical components

  • Grounding

  • Repair of defect traces / tracks or creating smooth jumpers on PCB board

  • Lightning Strike Protection and EMI/RFI Shielding

  • Lower temperature bonding of electrical modules

  • High frequency shields, waveguides

  • Terminal attachment to solar cell panels

  • Quick and inexpensive mounting of LEDs

  • Conductive traces on 3D printed parts

  • Radio-frequency identification (RFID) tags

  • 3D antennas

  • Easy repair of household electronics and car rear shield heater

 

Data Sheet Graphene Silver Conductive Epoxy

 
SKU G6E-NS10
 
$35.99
 
Size (Part A+Part B)
Quantity

Detailed images

Customer feedback

Customer Reviews

There have been no reviews for this product.
nbsp;
Join Our Email List
Email:  
For Email Marketing you can trust
Official PayPal Seal